The Elektor Forum will close. See also this link. From Friday March 15st it is no longer possible to log in to the forum. However, the content of the forum will remain visible until the end of March. As of April 1st the forum will definitely go off the air.

LCR meter - New firmware released

Equipment, circuits, projects, procedures

LCR meter - New firmware released

Postby snoopy_94 » Sat Jan 02, 2016 5:36 pm

Firmware Version 3.1.0
- All settings can now be made in stand-alone mode
- Only the firmware update, using the AU2011 program, requires connection to the PC.

To access the "extended Menus", press the buttons Freq- & Freq+ before you start. The "Extended Menus ON" message is displayed briefly.
Extended Menus are:
"Test voltage adj. "
"Sense Resist. adj."
"Input phase adj. "
"PGA phase adj. "
"Erase EEPROM... "
"Buffer offset adj."
"Input offsetU adj."
"Sinus offset adj. "
"Input offsetI adj."

This change should provide more flexibility in the use of the LCR-Meter.
Your comments are welcome.
Attachments
LCR3A_firmware_V310.hex.zip
(42.71 KiB) Downloaded 671 times
snoopy_94
 
Posts: 90
Joined: Thu Jan 02, 2014 10:48 am

Re: LCR meter - New firmware released

Postby sigo » Fri Jan 15, 2016 9:02 am

Hier das Ganze auf Deutsch:

Die neue Firmware Version 3.1.0 weist folgende Verbesserungen auf:

- Jetzt können alle Einstellungen im Stand-Alone-Modus vorgenommen werden
- Nur ein Firmwareupdate , das das AU2011-Programm verwendet, erfordert eine n Anschluss an den PC.

Um in die "erweiterten Menüs" zu gelangen, drücken Sie die Tasten Freq- und Freq+ gleichzeitig, vor dem Start. Die "Erweiterte Menüs ON" - Meldung wird kurz angezeigt.
Es erscheinen die erweiterten Menüs..

"Test voltage adj. "
"Sense Resist. adj."
"Input phase adj. "
"PGA phase adj. "
"Erase EEPROM... "
"Buffer offset adj."
"Input offsetU adj."
"Sinus offset adj. "
"Input offsetI adj."

Durch diese Änderung sollte der Gebrauch des LCR-Meters flexibler werden.
Der Autor bittet im Forum um Ihre Kommentare.

Die Software kann im Forum unter o.g. Link heruntergeladen werden.

Ralf Schmiedel
Elektor Leserservice
sigo
 
Posts: 14
Joined: Mon Jul 21, 2014 1:36 pm

Re: LCR meter - New firmware released

Postby eleksig » Mon Jan 16, 2017 8:11 am

Dear Jean-Jacques Aubry

Is possible to get latest LCR firmware source code?

Best regards,
eleksig
eleksig
 
Posts: 1
Joined: Mon Jan 16, 2017 7:50 am

Re: LCR meter - New firmware released

Postby snoopy_94 » Wed Jan 18, 2017 10:34 am

eleksig wrote:Dear Jean-Jacques Aubry

Is possible to get latest LCR firmware source code?

Best regards,
eleksig


Dear eleksig,

Find attached the V 3.1.0 firmware source code.

Jean-Jacques
Attachments
LCR3A_V310.rar
LCR firmware V3.1.0
(131.23 KiB) Downloaded 317 times
snoopy_94
 
Posts: 90
Joined: Thu Jan 02, 2014 10:48 am

Re: LCR meter - New firmware released

Postby hadihf » Sat Jun 03, 2017 4:12 am

Hi JJA,

It seems LM2611A is an exact replacement for LT1611? Please correct me if not so.

Regards
Farooq
hadihf
 
Posts: 49
Joined: Thu Jan 02, 2014 10:37 am

Re: LCR meter - New firmware released

Postby snoopy_94 » Sat Jun 03, 2017 8:06 am

hadihf wrote:Hi JJA,

It seems LM2611A is an exact replacement for LT1611? Please correct me if not so.

Regards
Farooq

Hi Farooq,

Both circuits seem very similar. The B version, with a current limitation of 0.9A is closer to that of the LT1611 (0.8A).
If you try it, inform we of the result!

Best Regards,
Jean-Jacques
snoopy_94
 
Posts: 90
Joined: Thu Jan 02, 2014 10:48 am

Re: LCR meter - New firmware released

Postby instrumentsmeco » Wed Aug 22, 2018 7:14 am

I watched this tool on mecoinst.com there provide complete guidance about LCR meter
An LCR meter may be a kind of electronic equipment accustomed live the inductance (L), capacitance (C), associated resistance (R) of an electronic component[1].
https://www.mecoinst.com/meco-products/lcr-meter.aspx
instrumentsmeco
 
Posts: 4
Joined: Wed Jul 18, 2018 9:42 am


Return to Test & Measurement

Who is online

Users browsing this forum: No registered users and 1 guest