Soldering Iron Tip Saver

The electronics enthusiast's product design cycle

Postby k_s_soin » Wed May 30, 2007 12:00 am

I had built this circuit in 1985 from Elektor Magazine. I am um unable to find tis mag in my collecetion. This circuit uses a counter perhaps a CD 4060, triac and two switches. I want to buld this circuit again.
Can any one help.
k_s_soin
 
Posts: 1
Joined: Thu Jan 02, 2014 10:40 am

Postby tinminer » Wed May 30, 2007 12:00 am

There is a project in the December 1984 issue" give your soldering tip a longer life" , it may be the one you want.
tinminer @ bigpond.com
tinminer
 
Posts: 12
Joined: Thu Jan 02, 2014 10:37 am

Postby tinminer » Wed May 30, 2007 12:00 am

I found that article in my old magazines, let me know if you cannot find what you need.

tinminer @ bigpond.com
tinminer
 
Posts: 12
Joined: Thu Jan 02, 2014 10:37 am

Postby karanbir » Thu Sep 24, 2009 12:00 am

Yes that is the circuit I am lookig for.
(Excuse the absence from the scene for so long, I have registered again as I lost my id and password.)
Can you send me the scan of this article.
Thanks once again for your response.
Best Regards
Karanbir
karanbir
 
Posts: 2
Joined: Thu Jan 02, 2014 10:40 am

Postby maxxypane » Fri Nov 18, 2011 12:00 am

Well, here is the list of parts that will be used to build this circuit. Hope this will help you. R1-2.2MΩ, R2-18KΩ, R3-1KΩ, R4- 1KΩ, R5-1KΩ, R6-1MΩ, VR1- 500KΩ (504), C1- 220nF (224), C2- 10nF (103), D1- LED, D2- LED, D3- 1N4001, Q1- BC547, IC1- CD4060, RL1- Relay etc.

Gold Contact Repair Kit'
maxxypane
 
Posts: 5
Joined: Thu Jan 02, 2014 10:39 am

Re:

Postby radcliffkaty1 » Mon Jul 16, 2018 12:45 pm

maxxypane wrote:Well, here is the list of parts that will be used to build this circuit. Hope this will help you. R1-2.2MΩ, R2-18KΩ, R3-1KΩ, R4- 1KΩ, R5-1KΩ, R6-1MΩ, VR1- 500KΩ (504), C1- 220nF (224), C2- 10nF (103), D1- LED, D2- LED, D3- 1N4001, Q1- BC547, IC1- CD4060, RL1- Relay etc.Gold Contact Repair Kit'


I tried to open the link you have shared "Gold Contact Replating Kit" but it is not working. But then, I found that you have a shared the link of soldertools.net website. From that site, I also purchased the same kit and to be true, that kit rocks. I would like to correct that share link so that others can also get that.

Gold Contact Replating Kit
radcliffkaty1
 
Posts: 4
Joined: Thu Jun 28, 2018 11:10 am


Return to CAD, Simulation, PCBs, Making, 3D Printing

Who is online

Users browsing this forum: No registered users and 1 guest