Page 1 of 1

PostPosted: Sat Jun 02, 2012 12:00 am
by triodes4ever
Hi all, I built a transistor ignition based on what I think is the following:

The April 1980 issue (pages 10 to 15) does feature a Transistor Ignition project which uses BC547/557, BC516, BD131/242A, BU208A transistors to switch the primary winding of the car's standard ignition coil, replacing the mechanical contacts (still employed as trigger switch for the transistors). A one-page update (Transistor Ignition Update) for this project appears in September 1981 page 48.

I changed the input side to support the Hall element my replacement engine was equipped with. Now, 30 years later (and the car having become a classic) it no longer works. Guess what: schematic gone!

Anyone able to dig this up for me? Costs compensated!

Cheers Leonard (NL)

PostPosted: Thu Sep 20, 2012 12:00 am
by kellys_eye
Hi,

I can scan from a copy I have - send me your email!

Re: Transistor Ignition Article (desparately) needed

PostPosted: Sun Jan 18, 2015 10:58 am
by spankysdad
Hi Leonard,
As long as your car is negative earth, if all else fails you could build a Velleman K2543 Transistor ignition kit or similar.
it uses a 2N2219A and a TIP162.
Phil

Re: Transistor Ignition Article (desparately) needed

PostPosted: Tue Jun 02, 2015 1:53 pm
by Elektor Editor
It's: Solid-state Ignition, January 1986, pages 14 - 18, ref. 85128.
The article is on The Elektor 1980s DVD, see our Store website.

I personally used the prototype in my Opel Kadett C 1.2S across 150K miles. No problems, 20% less fuel consumption, excellent starting in winter.

Jan