Attention ! Fermeture imminente du forum d’Elektor (pour en savoir plus, cliquer ici). À partir du vendredi 15er mars il ne sera plus possible de s’identifier sur ce forum, mais son contenu restera disponible en lecture seule jusqu’à la fin du mois. Le 1er avril, il sera fermé définitivement.

LCR Meter won't trim

Postby peter_clark » Tue Jun 25, 2013 12:00 am

Hi Snoopy_94,

I posted this problem on the "Test and Measurement" forum a while back, but nobody has come up with a solution so far:

With J1 fitted the PC screen shows about 8.4milliohm. Pressing the TRIM button causes "Process Short Circuit Trim... Frequency: 100Hz" followed 4s later by "process failed". With J1 removed the screen shows about 700Megohm. The TRIM button causes "Process Open Circuit Trim... Frequency: 100Hz" followed 7s later by "process failed".

Any advice would be gratefully received.

Kind regards,
Peter Clark.
peter_clark
 
Posts: 6
Joined: Thu Jan 02, 2014 10:48 am

Return to Le LCR-mètre 0.05% (3/4/5-2013)

Who is online

Users browsing this forum: No registered users and 1 guest